I NEED SOME HELP!
I just bought another 1950 SC and have been doing normal maintenance, tune ups, and fixing leaks. It starts up on first push of starter button but I am having problems with adjusting the carb. Tractor runs great with no load or in lower gear, but if I try to start out in 3rd or fourth gear it dies. The intake manifold is cold and sweating. I have adjusted the carb to the specs in the Service manual and even opened up the load adjustment about half a turn more. I need some advice from someone more experienced on these carbs and engines. Like I say I own 2 of these SC's and really like them. I am going to make one just for pulling and the other to restore and use around our property. So any help would be greatly appreciated!!!
Thanks
jimbob09
I just bought another 1950 SC and have been doing normal maintenance, tune ups, and fixing leaks. It starts up on first push of starter button but I am having problems with adjusting the carb. Tractor runs great with no load or in lower gear, but if I try to start out in 3rd or fourth gear it dies. The intake manifold is cold and sweating. I have adjusted the carb to the specs in the Service manual and even opened up the load adjustment about half a turn more. I need some advice from someone more experienced on these carbs and engines. Like I say I own 2 of these SC's and really like them. I am going to make one just for pulling and the other to restore and use around our property. So any help would be greatly appreciated!!!
Thanks
jimbob09