dc hyrdaulic oil question

steven in Tn · Jul 19, 2014

got a dc that has got water in trans and hyd oil and going to drain them both. i know the trans takes about 10.5 gallon of gear oil, but what about the back plug is that the hydraulic oil or gear oil aswell? in the picture i think the left plug is trans and right one is hyd is that correct? how much does the back one hold my manual doesnt say.

casecollectorsc · Jul 19, 2014

Yep, back plug is for hyd. oil. Book says 10 quarts and 11 1/2 quarts with a hyd. cylinder. Use hy-tran or good equivalent in hyd system.

C. Amick · Jul 19, 2014

I think there is a hydraulic oil level plug on the opposite side of the tractor.

steven in Tn · Jul 20, 2014

what is a good way too flush both sides with out hurting any thing?

casecollectorsc · Jul 20, 2014

I have put 5 gallons of diesel in the DC rear end and drive around the yard some and drain again. Probably put some in hyd. reservoir at the same time. Worked for me, others may have a different idea.

dc hyrdaulic oil question

steven in Tn

Member

casecollectorsc

Well-known Member

C. Amick

Well-known Member

steven in Tn

Member

casecollectorsc

Well-known Member

Similar threads