1070 power shift

dtubbs5

Member
When driving out of the shed after tractor has
been sitting over night & then stopping, it stops
abruptly like something is sticking. After a
couple minutes it's fine. Does one of the spools
need cleaning? Also, when power shifting from 3rd
to 2nd in 3rd range there's a clank. Power shift
works good but I never heard the clank noise
before. Just changed the filters & they weren't
very dirty. Any help welcome.

Thanks, Dennis
 
Dennis, if it stop abruptly like you slammed the brakes on as you pushed the clutch in my first guess would be C-3 pilot spool was sticking. 9 times out of 10 it seems as that spool is the first to hang-up. I have no idea why. There are other things that can cause that to happen, but C-3 will cause it to happen, just as you explained. Stuck bad enough it will kill the engine when the clutch is depressed. Rod.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top