Sleeve Protrusion Shim Part Number??

John Saeli · Apr 21, 2014

I need to shim up the engine sleeves in a 1030 I'm building & need shims. I cannot find any reference to them in the parts books, but have heard servicemen in the shops talk about getting them from CASE. Can anyone help?

1370rod · Apr 21, 2014

John,I have some, both .005 and .010. I can not be in the shop until later this afternoon at which time I can get you the part no. or just sell you some if you like. Rod.

John Saeli · Apr 21, 2014

Rod: Appreciate the reply. Part numbers of the .005" would be great.

1370rod · Apr 21, 2014

John, the part no. A150306 is a .005 shim for a 451. I do have them on hand, $50 for a set of 6 if you can not find them. Rod.

casecollectorsc · Apr 21, 2014

Rod, do you have the tool to cut the top of the block? I assume you do your own. Have been lucky to have a dealer let us use theirs.

1370rod · Apr 21, 2014

Steve, yes I do and I bought a lot of shims years back fearing they would discontinue them, Rod.

Sleeve Protrusion Shim Part Number??

John Saeli

Well-known Member

1370rod

Well-known Member

John Saeli

Well-known Member

1370rod

Well-known Member

casecollectorsc

Well-known Member

1370rod

Well-known Member

Similar threads