air cooled Case engine parts

I bought an aircooled Case engine at a sale. It was all apart and so I stored it the way I found it. We looked it over yesterday and found two bent connecting rods. stuck pistons and a cracked sleeve. I've decided to scrap it but am wondering if anyone is looking for parts like oil pump, camshaft, valves tappets, etc. before it is delivered to the scrap man.
 
The parts you listed are the same as the ones for the VA series and the 200 and 300 series. There should be a market for them. Lee
 
Could other parts of a VAC be used to rebuild this engine? like pistons, sleeves, connecting rods etc?
 
It has the same pistons as the 200 series (3 1/8" bore). Rods would not be a problem as they are the same as 200, 300 series as well as the later VA series. The problem will be the cylinders as they are individual units that bolt to the crankcase and do not have a removable sleeve. In my area these engines were used on tobacco harvesters and were very common. Unfortunately with the modernization of that process they have about all been scrapped. Lee
 
Manitoba Case my E-Mail is open lets talk about this engine. If your interested in selling all the parts you have I may be interested in it.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top