411b not pulling

Anonymous-0

Well-known Member
Hello everyone or anyone. I am still having issues with my tractor. The hydraulic pressure is below 15 psi. And the tractor won't pull a load. Any thoughts.
 
I will assume you have the COM full of oil, I have seen the flow control valve get debris in it and stick open dumping oil, it is located under the fuel tank beside the clutch spool valve, I think it has three 3/8" bolts holding it in very easy to remove and check to see if it is seating
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top