Got it home

Mike Fitz

Member
I picked up the plow I posted about yesterday. Good straight plow, moldboards rusty but not pitted, ought to clean up, no welds anywhere. The only problem is the missing tail wheel, the one the owner had was the wrong one. Mike
a151801.jpg

a151803.jpg

a151806.jpg
 
Nice plow. I don"t have a tractor large enough to pull it, but if I had the plow, I would probably go get a tractor large enough. Could you make one of those solid rotary mower wheels work?
 
I will have to work on the hub, from the picture Tom posted last night it is a 5 maybe a 6 bolt hub, I will have to see what I can locate. The previous owner had another plow just like it, but newer 50 feet away it was a very nice plow, ready to go, but he wanted to keep it. I don't blame him. Mike
 
Good find. Couple new tires, the tailwheel and drag it through the dirt for a bit to shine those bottoms up and she will be ready for work.
Where about in central Iowa are you located? I'm just west of Des Moines.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top