different DC

I didn"t know they did to Case tractors
a147609.jpg
 
nope ,, same old gal ,, just a different dress .. lol,,.where is the front tractor it was hitched too ? there is one hand control fastenedto radiator
 


Back in the 70's my uncle and dad built this digger but didn't have big enough tractors to pull it. Dad pulled his DC behind his 900 and my uncle used his Dc behind his 560. If I remember right he used a cable like is used on a truck hoist to control the throttle. He used a set of ropes and pulleys to engage and disengage the clutch on the D. The D didn't have hydraulics so some pipes and hoses ran up to the 900 for the digger. I am on the D just for the picture. The year following the one pictured he dualled up the D and the 900 but we don't have any pictures of that. Dad drove the 900, he used it for a few years until he got the G1000 MM.
plainsman1017.jpg
 
That's an interesting conversion; it was built in 1941 or 1942 because it has sliding rear wheels and base mount magneto according to Dave Erb's book. Propane equipment came much later; late 40's if I remember correctly.
 
Tom, I think the propane was factory for them in 50 or 51 but late 40's could also be possible for sure, they also made retro kits to change existing tractors as well I would say that one has the factory kit installed
 
I thought Dave Erb's book said when LP was an option, but I could not find it this morning; I now find it was in 1951.. The magneto change came at 4607033 and the axle change was at 4511449 putting the tractor at 41 or 42.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top