last field work of the year here

Case Nutty 1660

Well-known Member
well I can not really believe I got to work a few rounds to try out the "New WWC 37" out the 2nd of December!! she works great I do need to do a few more repairs to it before spring use but I was glad to get to test her a bit, the 1470 was pulling it in 5th gear but I can see if I am going deeper than 2"-3" I will be in 4th but that is not all that bad as its 5.2 mph cnt
a137067.jpg

a137068.jpg

a137069.jpg

a137070.jpg

a137071.jpg

a137072.jpg

a137073.jpg
 
Tom, your having too much fun!
I'm surprised Case didn't dual the main frame wheels.
Was it ever an option?
 
Tom, next year when pulling that chisel you have to get someone to take a little video, would love to see her pullin. Do you ever notice any wheel hop in tough conditions? Rod.
 
nice looking setup, think you should use that straight pipe 1470 with all those houses there wink wink (evil snicker)
 
no dual tire option on this model, but they did make room for the 11.5L x 15 tires up from the 6.70 x 15 on my "WC", compared to it this one has HUGE tires LOL
 
that one is still hooked to the "WC" chisel, and it will have a muffler by spring as well as this one needs a new one also, this one pulls as good or better than the other one too, this one is by far my fav of the three 1470's I have although I do like them all very much LOL
 
Great lookin' setup you have there Tom. Glad the "new" equipment is working well for you.
Kow Farmer Kurt
 
Tom you sure are lucky to be able to finish here in Northern Ill things are froze pretty tight took a ride with the neighbor yesterday Stieger 500 9 point chisel and he had his hands full not enough traction at times plenty of ponies though frost about 6" thick, I still have about 200 acres to go myself.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top