To all that have replied and were following my 930 rebuild question, here's an update. After dropping the pan and not finding the internal water leak,I reinstalled it and changed oil and filter. This tractor was not supposed to hold water at all. I was told it went straight to the pan. Well, I filled it with water and fired it up. Observed no bubbles in the radiator so I just let it run for an hour while watching the temp gauge. All was well,ran cool and oil looked good.
Yesterday I hooked the brush hog up to it and mowed for about 4 hours. Tractor ran great. Temp gauge stayed nice and cool. I checked the oil about every half hour and all looked good. So, I don't know what was going on. I think I'll just use it. Although, I'm still a bit confused.
Yesterday I hooked the brush hog up to it and mowed for about 4 hours. Tractor ran great. Temp gauge stayed nice and cool. I checked the oil about every half hour and all looked good. So, I don't know what was going on. I think I'll just use it. Although, I'm still a bit confused.