case 220 baler - working finally

Anonymous-0

Well-known Member
Had this baler for a few years now and we mostly round bale...only square baler we ever owned so not much knowledge...anyway about every 6th bale one side would not tie...very frustrating been messing with it once a year for 3 years...I walk following baler, dad bales...well I noticed that the one side of the string was outside pipe under baler close to needles not in the groove were it looked like it belonged...we cut string, put in groove, tied back together and never looked back. Only misses about one out of 30 or so now...I can live with that...still can't believe that fixed it!
Reaver
 
Good to hear you got significant improvement in tying. You must be very patient as 1 miss in 30 bales would drive me crazy. We switched from sisal to plastic twine and went from 1 miss in a 100 to none in 1000 this year. NH dealer says sisal twine variability is to blame. Don
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top