Dan Davidson
Member
I thought I would put 870 I recently bought on the round baler this season. All seemed fine until I started working the tractor. By the time I had 1/2 bale I was downshifting the powershift and by 3/4 I had to change ranges. Just had no guts at all. When I run the rpm's up to 2000 with no load I think I hear a little miss in it. Only at 2000...at 1800 it runs clean.
When I was baling and downshifting it was just pouring the black smoke like I was pulling a seven bottom plow before I would shift down.
Powershift 870.........put the 930 on the baler and finished up. Any ideas? I just purchased this tractor so I have no prior history. I,m kind of thinking timing may be off??
When I was baling and downshifting it was just pouring the black smoke like I was pulling a seven bottom plow before I would shift down.
Powershift 870.........put the 930 on the baler and finished up. Any ideas? I just purchased this tractor so I have no prior history. I,m kind of thinking timing may be off??