1951 SC project

Many thanks for all the info I got from this forum. John Saeli, his wife at external_link and Don Livingston at Rusty Acers. The information was very useful. I"ve got as many hours searching posts as working on the Sc.
Well anyway my story is I got this old case from my brother a couple years ago, motor rust frozen
drained out a five gal bucket of water from the crank case, after a motor rebuild, new clutch, brake work, new seals, radiator cleaned, starter, generator, lights, mag rebuilt, a little primer and paint. I lost track of time and money in this project but have enjoyed it.
a115270.jpg
 
I don't keep track of my expenditures either. Once I committ to the project, I'm all in. Most times if people knew how many dollars and how much time you had invested they would have you committed. lol gobble btw-good save looks good
 
She is almost done, I'm working on the fenders right now. Then I need put the rear light on, can't decide where to put it on the back or on the fender
a115281.jpg
 
The SC we had the tail-lite was mounted on the left fender. But I gota say are SC didn"t look that good,nice job. thanks for sharing.
 
Mark,they are sure a nice little tractor to have around the farm,they are so good on gas.
I have a "101" Case loader on one, and another that is a small chores tractor.
Thanks for posting and the pic of her too
Dan
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top