Guys, looking at what I think is a 130. Pretty clean original. Shed kept. Last used a few years ago when they had the belt come off and somehow it was ran backwards by hand and a needle got broke. NOS needle is sitting on the bale case. PTO drive. I also have tons of NOS parts for a 130/133. I'm cutting my hay ground down to 8 acres and we're currently using an AC 303 but parts from AGCO are getting very expensive if we can even get them. What is a baler like this worth? I know of a pair of parts machines nearby so I'm not worried about parts.
- Thread starter 1031D
- Start date
Case Nutty 1660
Well-known Member
Jim, the 130 I have is a sheded low hour baler that I bought some 18 years ago at auction I gave 500.00 for mine it would take a lot more to buy it, also to tell a 130 from a 133 a 130 does not have fenders over the wheels a 133 does with them being painted Desert Sunset (fenders) sorry this is not the best pic of it mine has a engine as well
casecollectorsc
Well-known Member
- Location
- E central SD.
The gentleman that Dad bought his farm from in 1965 bought a new 130. The 130s had some problems and he was less than happy with it. He made a lot of modifications on the 130 and got it working a lot better. He talked to the Case blockman and told him he would sell Case his mods. Case people came and watched it bale and made an offer on the baler. Not enough money, so he kept it in the shed. Caught Case people on the farm one Sunday after they came from church trying to figure out all his improvements. He hid the baler at nite so they couldn't find it. Finally came to a money agreement and the next year Case came out with the 133. It had his mods. on it. Dad bought a new 133 and you couldn't make that baler miss. Dad had the 133 when he bought the guy's farm and that's how the story came out.
fullerhull
New User
I'm trying to keep my Case 133 out of the scrap yard.
You mentioned you have (had?) NOS parts. I need a flywheel shaft (with pinion) to get mine back on the field. Any help is appreciated.
jicaseman89
Member
What is the difference from a 130/133 and a 200/220?? Parts interchange?
fullerhull
New User
Nope. My CASE dealer searched and found that the short flywheel shaft (part number B15605) only fits a CASE 133.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy