Newer VAC Throttle

connor9988

Well-known Member
Location
Central Iowa
Hello everyone.
My VAC has the throttle mounted on the steering column and it is really sloppy. Aside from the notch on the lever being worn off (we welded a little on it and have somewhat reformed it) the spring and rubber bushing on it are fairly worn out.
Does anyone know of any new ones that are around or if there are aftermarket kits for it?

Thanks
 
Are you talking the cast throttle lever? Those are tightened by a bolt and spring, no rubber parts. I have good used if needed.
 
this is a picture of a VAC with the same kind of
throttle lever that mine has.
(Same picture that I used on my "Seat" post.)
a100182.jpg
 
Ah ha! I was thinking the old style. I don't know if my butt would let that Bostrum seat go, but there's one on ePay. I have a spare late dash for parts. Let me look at it.
 
Haha. I can understand that. I think mine should
keep the old one anyways (I dont think my rump would
mind too much either.)
Thanks for the help!
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top