tach in 970 case

Anonymous-0

Well-known Member
Just wondering if anybody knows how to fix were the tach cable goes into the block of the tractor. were the cable goes in the square drive it does not spin, If this makes sence to anyone. Thanks
 
that is the tach drive it is a press fit into the block and has to be pulled to replace it, I don't have a pic of the puller I use maybe some one will post a homemade one of theirs cnt
 
Can I find that puller on the internet or could someone show me a picture or explaine it, Thanks for any help. I just bought this tractor just trying to fix it up. Thanks again Jesse
 
Here you go my Case friend. You will need the end off an old tach cable.
a98079.jpg
 
Spark plug from a CC works also. It is 7/8-18 thread. I had to make a puller Sunday to pull the same thing out of a 207. On the 207 and the 90 series trators they have male thread on the drive. Good thing I had the right tap from working on a Rock Island model F.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top