James of Stark
Member
- Location
- NE Ohio
Looking for some pages from the service manual for the hydraulic circuit. The one I'm working on is an early dry clutch 430 441 configuration. Someone replaced the control valve cover with a home made take off to supply the loader control valves.
The problem is that it seems to be a weak loader. Upon removing the side block, I observed that it is set up in a DA rather than SA for the eagle hitch. It seems that this would cause a problem in bypassing, at some point.
The loader moves plenty fast and the eagle hitch picks up anything I hook up. The loader does not pick up much weight. >500lbs
****I am working on this for a friend. I know there is a manual out there for $150, but I believe this could be solved for much less.****
The problem is that it seems to be a weak loader. Upon removing the side block, I observed that it is set up in a DA rather than SA for the eagle hitch. It seems that this would cause a problem in bypassing, at some point.
The loader moves plenty fast and the eagle hitch picks up anything I hook up. The loader does not pick up much weight. >500lbs
****I am working on this for a friend. I know there is a manual out there for $150, but I believe this could be solved for much less.****