1030 air breather in 830?

dbock

Member
Does anyone know if you can replace the oil bath air breather on a 830 with a dry type air breather from a 1030 and it still fit under the hood in front of the radiator?

Thanks,
Dan B
 
I don't think it would fit. The front bolster and grill screens for a 1030 are longer. I've thought about checking to see if it would work by replacing the complete bolster, nose cone and screens but never have.
 
i put a 1030 breather on this one u just have to remove the pannel beside the screen to get the filter out and the 1030 stack is offset to one side
a97404.jpg
 
Thanks! That is exactly the info I was looking for. My 830 is similar to yours except it is a case o matic and it has a m&w turbo on it which is why I would like the dry type filter. I also like the steps you have on yours. I assume they came from a 1030 or 930 also? Did they bolt right up?
 
the steps i had to weld a bracket on them and fenders did also because its not a flat deck tractor 18-4-34 rubber
 
JLLW I like the CK fenders on that tractor could you post a picture of how they are put on, or are the strong enough just bolted at the axle Thanks
 
i origonaly had them braced from diffrent spots but i came across a rops and canopy so i then bolted them to it which was much stronger sa to say i have sold it since pics were took i wish i had it back
a97423.jpg

a97424.jpg

a97425.jpg
 
I knew You Would wish you had kept it ! LOL .. Did you Get your price ?, and did You place that new 830 in a Good home ?, i remember seeing it when i was there last , You fellas done a SUPER NICE job with that 830..
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top