930 gas wiring help needed

Brokengun

Member
I must be getting old. I feel like an idiot for having to ask something that should be simple. I have a wiring diagram and its not clear how the wires connect.

I’m painting my 930CK gas and I can’t remember where the wires connect on the solenoid.

There’s one (1) wire from the resistor and one (1) wire on the (+) positive side of the coil and I need to know where they go.

Are they together?

Do they go on the outside of the solenoid or the inside?

I know where the other wires go.

So PLEASE if someone can remind me off where these wires are to be connected it would be much appreciated
 
this is a 730 gas but should be the same wire from the resistor goes to outside post on solenoid then to coil cnt
a97282.jpg

a97283.jpg

a97284.jpg
 
Don"t feel bad, brokengun. I had to ask the same question a couple of weeks ago, regarding my 830. I yanked all the old wires off and threw them away then a week or so later I"m trying to figger out what goes where. The old noggon don"t work as good as it use to and those wiring diagrams in the books are just a little bit better than nothing.

If you need more help here, reply back. I finally got mine running and have all the info at work. Case nutty saved me too. The white wire goes from the resistor then up to the + side of the coil...slim
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top