530 case indepentant pto clutch slipping

bobby77

New User
i have a 530 case with an indepentant pto....it is engaging and free spinning without problems but stops whenever a load is put on it...would anything other than pto clutch discs worn cause this....oil
level is good
 
Does the lever to engage the PTO require 50-65 lbs of pressure to engage. The lever should literally "snap" over center.
 
here are scans showing the procedure, the parts break down is just to help you understand how it adjust's, if you can not read these e-mail me at [email protected] and i will send them as attachments so they are larger cnt
a95489.jpg

a95490.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top