Adirondack case guy
Well-known Member
I have been kind ashamed to post some of the pics., lately of the 300. Back when Jon was here I told him that I had to get out the rubbing compound and bring the paint back, and clean it up. The ride It took me on to the upper 40 the other day cleaned it's sneakers up so they were nice and black again, and its belly got masaged in the deep snow, so after plowing all the drives and sidwalks yesterday, I grabbed some rags, and went after it. After I got the hood and fenders rubbed out, I decided to install the CASE Emblem on the hood that I'm sure you noticed wasn't there, along with the cast aluminum hinged grill frame, which I can live wuthout.
Sooo, I found me a peice of scrap 1x strap iron and formed a round bezel, and cut a round metal disc, tack welded and sealed with silicone in back to mount and protect the fragile new emblem, (Thank You again,Joe B). The emblem is parcially recessed in the bezel so if a limb or something strikes that area the bezel should keep the emblem from getting broken. I took the old gal out into the sun and snow today, sooo, she could show off with her better look.HeHe.
Happy New Year to ALL you my CASE Friends.
Loren
Sooo, I found me a peice of scrap 1x strap iron and formed a round bezel, and cut a round metal disc, tack welded and sealed with silicone in back to mount and protect the fragile new emblem, (Thank You again,Joe B). The emblem is parcially recessed in the bezel so if a limb or something strikes that area the bezel should keep the emblem from getting broken. I took the old gal out into the sun and snow today, sooo, she could show off with her better look.HeHe.
Happy New Year to ALL you my CASE Friends.
Loren