|
| |
| Case Tractors Discussion Forum |
Topic: Re: Torque curve for 504BD in a 2090
[Show Entire Topic] [Return to Forum]
| Author |
[Modern View]
|
| rusty6
12-28-2012 07:43:29
142.165.85.10
|
| D-C-741 said: (quoted from post at 17:12:53 12/27/12) When new they Did not have any,DAD bought our"s New,they had no lugging power,after the first year we had to turn the Fuel Screw 1 Turn =That brought it to life.A friend Bought 1. 3 years ago that 1 was no different.He asked if they were that way =yes =he turned his 1 turn =Life . |
I have never touched the injection pump on my 2090 in over 7000 hours and it has all the torque I have ever needed. Runs a grain vac no problem. Tillage, it will lug down to under 1000 rpm and still come back. I'll have to check my literature, might have some torque figures from the early 2090s. Mine is a 79, 8 speed standard trans.
Edit: in the brochure I have for the early 2090s, they show about 355 foot pounds torque at 1600 rpm for their best.
This post was edited by rusty6 at 09:48:11 12/28/12.
|
|
|
| [Show Entire Topic]
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
