Author	[Modern View]
Soldier Tom 12-03-2012 11:11:38 96.4.89.225 Report to Moderator	I'm looking for a decent right side panel with the tool box opening in it for a 52 VAC. Anybody have one to sell or know where to get one? Thanks in advance Walk in peace Tom [Reply]   [No Email]
Bill Krosnicki 12-05-2012 18:03:48 50.124.48.137 Report to Moderator	Re: VAC side panel in reply to Soldier Tom, 12-03-2012 11:11:38   They are parted out on ebay quite often. Not sure if these are the right ones. http://www.ebay.com/sch/i.html?_odkw=case+vac&_osacat=121876&_from=R40&_trksid=p2045573.m570.l1313&_nkw=case+vac+panel&_sacat=0 [Reply]  [No Email]
old 12-03-2012 12:14:49 209.86.226.34 Report to Moderator	Re: VAC side panel in reply to Soldier Tom, 12-03-2012 11:11:38   Do not know if they are the same but I have 2 1946 VAC parts tractors and I think I still have both of those side covers. E-Mail is open [Reply]  [No Email]
Christopher Mikesell 12-03-2012 15:27:47 76.226.210.121 Report to Moderator	Re: VAC side panel in reply to old, 12-03-2012 12:14:49   The 1946 VAC will have the toolbox door on the opposite side. [Reply]  [No Email]
51vac 12-03-2012 15:32:17 70.41.60.84 Report to Moderator	Re: VAC side panel in reply to Christopher Mikesell, 12-03-2012 15:27:47   46 vac side panels are also shorter than mid 51 and up. [Reply]  [No Email]
Soldier Tom 12-05-2012 10:56:22 96.4.89.225 Report to Moderator	Re: VAC side panel in reply to 51vac, 12-03-2012 15:32:17   Well, that's about my luck isn't it? Oh Well! Walk in peace Tom [Reply]  [No Email]