Tie Rods???

dflippin08 · Dec 2, 2012

Other that length, what is the difference between the tie rods on a 770 and a 570?

Case Nutty 1660 · Dec 2, 2012

they are not even close to the same the stem size on a 570 and ball stud size are smaller than a 770-1070 tractors as the 770-1070 and late 1175 all use the same tie rods there are diffferent ones according to axle width cnt

dflippin08 · Dec 2, 2012

I figured that the ball stud was a little larger. I was just wondering how much larger.

dflippin08 · Dec 2, 2012

Cnt, could take a picture of the outer tie rod stem and nut on the 770? Or tell me what the stem thread size is? Im not trying to be a pain.

Case Nutty 1660 · Dec 2, 2012

I will post one in a while I have to run to town right now cnt

Case Nutty 1660 · Dec 2, 2012

these are some NOS I had on the shelf, the smaller is a 430/530 and the larger is a "90" series but the threads are the same as a "70" series like in the other pic, the one witht the thresd by the tire is installed wrong as it should be towards the steering sector and not on the spindle but it was handy for thses shots, I also included a installed 530 pic as well as a 870, the thread size for the 530 is 1/2" and the 70/90 series is 5/8" cnt

Case Nutty 1660 · Dec 2, 2012

sorry for the misspelling I did not proof read very well cnt

dflippin08 · Dec 2, 2012

Thank you for taking that many pictures. I will send some pictures that explain what Im doin when Im done. The only veiw I have of a 770 tie rod is on our A&I link. thanks again. Flip

Tie Rods???

dflippin08

Member

Case Nutty 1660

Well-known Member

dflippin08

Member

dflippin08

Member

Case Nutty 1660

Well-known Member

Case Nutty 1660

Well-known Member

Case Nutty 1660

Well-known Member

dflippin08

Member

Similar threads