case 1370 PS problems

Dave1370 · Nov 12, 2012

Ok, here we go again. After I replaced the C-1 clutches, master seal kit, new pistons, and the "large" snap ring that goes inside of the drum, I slid her back together. Filled it up with new oil and went to start it up for the first time when the new problem was discovered. When I split her, she was in neutral, however, now its stuck in 4th. I jumped the neutral safety switch and turned it over several times. Still unable to get it out of 4th tho. Any suggestions? I REALLY don"t want to split her again

DKase · Nov 12, 2012

Are you SURE that the C2 and C3 clutch packs went togather freely?

1370rod · Nov 13, 2012

We have to talk, What you worked on should have no affect on 4th gear. Rod.

Dave1370 · Nov 18, 2012

Well figured out the "stuck in forth range" issue. I don't know how or why, but to fix it, I took off the shifting panel and slid the rear spool forward to get it in reverse. Now I was finally able to start it up just to find out everything I've replaced and the long cold nights spent in the shop was all for nothing. Sent her on a trailer today to the dealership since I STILL have no reverse, and still have a severe grinding when changing ranges. Told the driver to take it to the dealership or the scrap yard whatever he wanted. He laughed, but the funny thing is I was completely serious. I've NEVER had a tractor cause me so many problems....... Either the dealer will fix it, or scrap is high enough to forget about it for awhile.

case 1370 PS problems

Dave1370

New User

DKase

Well-known Member

1370rod

Well-known Member

Dave1370

New User

Similar threads