Author	[Modern View]
case trader 10-23-2012 04:15:12 67.142.162.21 Report to Moderator	Bought a 2294 at the auction a couple months ago, it seems a to have a small vibration when in third power shift,doesn't seem to make a differance what gear, in main trans always 3 in power shift, even coasting i can still feel it, most people it wouldn't matter but something is not right,bearing loose?or something out of balance? [Reply]   [No Email]
2290 10-23-2012 18:41:36 72.72.254.211 Report to Moderator	Re: 2294/quivers in reply to case trader, 10-23-2012 04:15:12   Case Trader, I had a 2290 in the shop a couple years ago. Find that the 3 button bearing on the c2/c3 carrier were gone. Replace them and vibration went away. Marlin1 [Reply]  [No Email]
case trader 10-23-2012 08:29:26 67.142.162.25 Report to Moderator	Re: 2294/quivers in reply to case trader, 10-23-2012 04:15:12   C/N that is were i was headed,didn't have much to do for a couple of hours this AM so i split it and both limiter clutchs were shot still holding the tractor but all springs are gone and the hubs are very loose????(i never do very good at the casino,put her together ???)(nutty i've had good luck having a machine shop bush that hub) [Reply]  [No Email]
Case Nutty 1660 10-23-2012 08:31:42 75.127.24.27 Report to Moderator	Re: 2294/quivers in reply to case trader, 10-23-2012 08:29:26   thanks good to know cnt [Reply]  [No Email]
Case Nutty 1660 10-23-2012 05:23:39 75.127.24.27 Report to Moderator	Re: 2294/quivers in reply to case trader, 10-23-2012 04:15:12   a 2670 I bought did the same thing found the rear carrier brg on PS drum had went out wallered out the drum where the outside of the brg ran, PO had just replaced the brg but not the high dollar drum, I hope this is not the case with yours but it was with mine cost me a lot of new parts was lucky I did the work myself saved the labor but was still $$ but was worth it in the end ended up a very good tractor cnt [Reply]  [No Email]