Author	[Modern View]
outsidersag 10-11-2012 20:47:12 75.245.182.241 Report to Moderator	Does anyone know where to get a pressure plate for a 53 DC with live power and hand cluth? [Reply]   [No Email]
Dale in nw wa. 10-12-2012 20:25:13 67.206.186.68 Report to Moderator	Re: DC pressure plate in reply to outsidersag, 10-11-2012 20:47:12   You might check the ajustment bolts or screws that work the preasures plate fingers. On my 53 DC with foot clutch one of the heads broke off and it would not go in gear> Before it broke of it was a bear to get in gear about had to shut off motor to get in gear Good luck Dale [Reply]  [No Email]
D G Wells 10-12-2012 18:57:56 69.6.131.161 Report to Moderator	Re: DC pressure plate in reply to outsidersag, 10-11-2012 20:47:12   j, Look up "Case LA Tractor Split" in the Case discussion search box and you will see how the hand clutch is put together or taken apart. The LA may be similar to the DC. ---Derrol in Texas--- [Reply]  [No Email]
j hikemper 10-12-2012 07:03:36 50.102.5.142 Report to Moderator	Re: DC pressure plate in reply to outsidersag, 10-11-2012 20:47:12   google ,,,ky clutch,they rebuild everything and ship too......... [Reply]  [No Email]
longcases 10-12-2012 05:18:12 206.126.209.6 Report to Moderator	Re: DC pressure plate in reply to outsidersag, 10-11-2012 20:47:12   Whats wrong with your pressure plat? Not much to go wrong with them.I have some in tractors,I think I saw a loose one the other day,I will check. [Reply]  [No Email]
outsidersag 10-12-2012 10:23:26 75.234.241.127 Report to Moderator	Re: DC pressure plate in reply to longcases, 10-12-2012 05:18:12   If you get it set so it got good snap when you push it in,it wont release rite. dont want to stop and grinds going into gear [Reply]  [No Email]
dboll 10-13-2012 06:59:07 209.23.168.139 Report to Moderator	Re: DC pressure plate in reply to outsidersag, 10-12-2012 10:23:26   did you adjust your pulley brake? It affects the throw on the clutch fork. If you can't fix what you have I have a 52 with live pto that I have been parting, or better yet I could sell you a pretty good 53 dc! [Reply]  [No Email]
outsidersag 10-13-2012 08:55:23 75.245.15.91 Report to Moderator	Re: DC pressure plate in reply to dboll, 10-13-2012 06:59:07   Its Kieth Wicks tractor. Not sure if he adjusted the pulley brake. I got a nice 53 DC, 54 SC and a 42 VC at that sale by Mitchell a couple weeks ago. [Reply]  [No Email]
dboll 10-13-2012 18:22:55 209.23.168.51 Report to Moderator	Re: DC pressure plate in reply to outsidersag, 10-13-2012 08:55:23   I didn't hear about that sale. Maybe a good thing as I am planning on thinning out my collection instead of adding to it! [Reply]  [No Email]
outsidersag 10-13-2012 19:53:14 75.221.146.15 Report to Moderator	Re: DC pressure plate in reply to dboll, 10-13-2012 18:22:55   I went only for the SC. Cant pass up good deals i guess!! [Reply]  [No Email]
DKase 10-12-2012 19:58:46 75.102.180.184 Report to Moderator	Re: DC pressure plate in reply to outsidersag, 10-12-2012 10:23:26   Do you have it out of the tractor, or just looking before you pull it appart? Sounds like one of the pins fell out. Had a 930 std. do that. Installed another pin through the hand hole. Not simple, but easier than splitting. Those wet clutches do not wear out. Problem should not be that hard to find. [Reply]  [No Email]
outsidersag 10-12-2012 20:45:51 75.221.6.136 Report to Moderator	Re: DC pressure plate in reply to DKase, 10-12-2012 19:58:46   Its still in the tractor. I will look if a pin is out [Reply]  [No Email]
casecollectorsc 10-12-2012 21:15:58 64.33.230.27 Report to Moderator	Re: DC pressure plate in reply to outsidersag, 10-12-2012 20:45:51   When I had mine apart, the rivets had worn off and a piece of the disc had overridden the rest of the disc, making it double in that spot. When trying to adjust, had the same problem you're having. Hy- Capacity rebuilt my disc, as they said the disc for live power DC's is hard to find?!? [Reply]  [No Email]
casecollectorsc 10-12-2012 05:04:27 64.33.231.200 Report to Moderator	Re: DC pressure plate in reply to outsidersag, 10-11-2012 20:47:12   I got a disc rebuilt by Hy Capacity. Maybe check with them on the pressure plate also. [Reply]  [No Email]
Stephen Newell 10-11-2012 21:32:29 66.53.81.176 Report to Moderator	Re: DC pressure plate in reply to outsidersag, 10-11-2012 20:47:12   Try John Saeli. email him at jsaeli@rochester.rr.com [Reply]  [No Email]