case 2290 pto

rogerssprings · Sep 23, 2012

while blowing silage pto will kick out and quit turning cable will still be engaged check pressure at idle 200 psi, at full speed 100 psi check at line going into pto housing (power shift has been down for years 1 st and rev works 2 nd or 3 rd doesn"t) need to finish blowing silage in 75 ft silo" any ideals would be helpful thanks

case trader · Sep 24, 2012

Roger as you know it has to have press. to stay engaged,for some reason you are loosing to much press.i no of no way to over ride this problem you say 2 an 3 are out so you only have 1 choice, to use reverse wil create more problems.as far as the ps problem probably the bolts. broke or a belville spring broke letting a piston come out to far

rogerssprings · Sep 24, 2012

thanks for the info i guess we need to start digging

case 2290 pto

rogerssprings

New User

case trader

Member

rogerssprings

New User

Similar threads