| Author |
[Modern View]
|
| Adirondack case guy
09-21-2012 15:21:33
74.69.160.79
|
 OK, There seams to be a bunch of us who have these little guys. Post a pic of yours with sn# so we can compare notes, and perhaps start a compitition on dressing them up to go to church. Here is ours, sn# VA5154475. |
|
|
| mattwillson
09-22-2012 16:58:46
74.14.64.143
|
|
Re: Let's Compare Our Little Case VAs in reply to Adirondack case guy, 09-21-2012 15:21:33
|
|
| I have a va13, a really nice little guy for fooling around in the bush with. 13's are a high arch version good for cultivating, I'm looking for a cultivator for it. |
|
|
| Bruce from Can.
09-22-2012 15:03:30
70.31.82.231
|
|
Re: Let's Compare Our Little Case VAs in reply to Adirondack case guy, 09-21-2012 15:21:33
|
|
|    Glad to jump in here with a VA sn #5457948 and VAC-14sn#6001901 Rideing these tractors takes me back to my youth as these were what we had on the farm in the 60's. One day the VAC stalled very abrubtly, and seems to be stuck. You cannot crank it, and yes it did have motor oil in the crankcase. I am afraid somthing has come apart inside.I hold out a faint hope that maybe the clutch flew apart and has jamed the fly wheel. Going to have to tear into it to find out. Bruce |
|
|
| Jim McVay
09-23-2012 16:41:41
71.3.207.160
|
|
Re: Let's Compare Our Little Case VAs in reply to Bruce from Can., 09-22-2012 15:03:30
|
|
| Drop the pan and check out the oil pump first. They were bad about searing the woodruf key where the pumping ear is driven by the shaft. |
|
|
| Adirondack case guy
09-22-2012 16:05:26
74.69.160.79
|
|
Re: Let's Compare Our Little Case VAs in reply to Bruce from Can., 09-22-2012 15:03:30
|
|
|  Bruce, Glad you got my message. I didn't know you had a 14 also. The first tractor that I plowed with on my own was a VAC14 with a BR breakaway plow. I remember plowing on a steep hillside, and the plow hooked a ledge. The dam thing rolled all the way down the hill and into a swamp. I had to go back to the farm shop and get a chain and drag it out. I had to use the "donkey dong" like a tine on a fork lift to wright the plow and rehook at the edge of the swamp.The pic. is from our 411B with MTA34 plow, this spring. Same field, same place, just 56 years later. How time flys!!!! Loren |
|
|
| mike plotner
09-22-2012 11:45:40
71.50.34.3
|
|
Re: Let's Compare Our Little Case VAs in reply to Adirondack case guy, 09-21-2012 15:21:33
|
|
| no VA but we got a VAC-14 narrow front with eagal hitch and remote hydralics. pretty nice little tractor |
|
|
| 1031D
09-22-2012 08:54:02
107.8.250.69
|
|
Re: Let's Compare Our Little Case VAs in reply to Adirondack case guy, 09-21-2012 15:21:33
|
|
| Funny, the VA is part of the series we don't have many of around here! I have 5 VAC's a VAC-14 and a VAS though! Nice pictures! By the way Dan, that magneto drive is pretty hard to come by. My 1944 VAC chicken roost originally had a magneto but the drive needs work. |
|
|
| Case Nutty 1660
09-22-2012 09:18:55
75.127.24.27
|
|
Re: Let's Compare Our Little Case VAs in reply to 1031D, 09-22-2012 08:54:02
|
|
| Jim I have a extra one from a combine engine if you need just the mag drive cnt tom |
|
|
| Ande
09-22-2012 06:00:06
66.231.109.173
|
|
Re: Let's Compare Our Little Case VAs in reply to Adirondack case guy, 09-21-2012 15:21:33
|
|
|  I will try and get a better picture of my "VA" today |
|
|
| Case Nutty 1660
09-22-2012 07:02:07
75.127.24.27
|
|
Re: Let's Compare Our Little Case VAs in reply to Ande, 09-22-2012 06:00:06
|
|
| sure is a nice "VA" must be same vintage as Bro Loren's,, by the way Dan will you take us thru proper starting procedure on a MAG equipped "VA" series?????? LOL LOL cnt tom |
|
|
| Ande
09-22-2012 13:38:40
66.231.109.173
|
|
Re: Let's Compare Our Little Case VAs in reply to Case Nutty 1660, 09-22-2012 07:02:07
|
|
| Yea,should have known this was coming,darn,I think I need some Case schooling Tom,cause I'm slipping! Geez,whats next?! Oh yes,I know! |
|
|
| Bad Birdie
09-21-2012 23:17:43
66.112.66.247
|
|
Re: Let's Compare Our Little Case VAs in reply to Adirondack case guy, 09-21-2012 15:21:33
|
|
| You guys have some nice little "VA's". They have been one of my favorite Cases since I was a youngster. I have a few VAC's myself. Some are parts, one I use around the house, and another is a pulling tractor only. I can't wait to see how these restorations play out! I am planning to swap some 67 tooth bull gears I have into the puller and install a chicken roost steering over the winter, or when time and money allow... |
|
|
| Case Nutty 1660
09-21-2012 16:03:28
75.127.24.27
|
|
Re: Let's Compare Our Little Case VAs in reply to Adirondack case guy, 09-21-2012 15:21:33
|
|
|     here are my two Bro, the one that is apart I got from an estate sale it has new sleeves/pistons/ valves just need to finish her up the 1950 model runs like a watch and has Eagle hitch, no way can I compete with you on resto work cnt tom |
|
|
| Adirondack case guy
09-21-2012 17:54:22
74.69.160.79
|
|
Re: Let's Compare Our Little Case VAs in reply to Case Nutty 1660, 09-21-2012 16:03:28
|
|
| Hay Bro, Both of yours have the 5 star wheels. Ours has the solid 24" wheels. Thats why I called it a VAI, but it doesn't have a "high 4th". The son was driving it on the upper road and got passed by an Amish guy in a buggy. LOL Loren |
|
|
| Case Nutty 1660
09-21-2012 18:01:18
75.127.24.27
|
|
Re: Let's Compare Our Little Case VAs in reply to Adirondack case guy, 09-21-2012 17:54:22
|
|
| LOL I believe all the earlier "VA"'s had the smaller 24" wheel like the "VAI's" I do have two sets of "VAI" wheels one set are on a "VAI", com'on out and help me spruce'm up a little LOL cnt tom |
|
|