Author	[Modern View]
Ron Haling 08-10-2012 05:30:23 138.130.145.136 Report to Moderator	I have restored a Case VA Serial No. 5164160 which is a 1947 model This model takes the Headlights on a Stem rod which I have obtained from USA supplier Can somebody tell me where and how these should be fitted on this tractor PLUS where do you fit the rear light Thanks Ron [Reply]   [No Email]
WeirdDeere 08-15-2012 01:09:15 208.93.186.222 Report to Moderator	Re: Fitting Lights to Case VA in reply to Ron Haling, 08-10-2012 05:30:23   A couple not so great pictures of the brackets I have the tractor in pieces right now. If you want a picture of the brackets, I can take one Brandon   [Reply]  [No Email]
AJB-830 08-10-2012 19:40:45 50.105.131.12 Report to Moderator	Re: Fitting Lights to Case VA in reply to Ron Haling, 08-10-2012 05:30:23   Ron, Here are a couple of pictures showing the stem lights on my 1946 VAC Case. I assume they are the same on a 1947. My dad bought this tractor in about 1948, so I am sure the lights came this way from the factory. The rear light is mounted on the seat but I don't have a picture. Send me an email and I can take a picture of the rear lamp too. Al   [Reply]  [No Email]
j hikemper 08-10-2012 07:15:18 50.102.80.116 Report to Moderator	Re: Fitting Lights to Case VA in reply to Ron Haling, 08-10-2012 05:30:23   my vac has the stem rod mounted to the clutch side floor board ,rising above the board perhaps a foot , the brake side has a simple bolt on under the floor board ,, the rearlite is mounted to the seat asssembly ,, i would ground the lite,,   [Reply]  [No Email]