| Author |
[Modern View]
|
| Don L.
08-04-2012 13:04:15
99.196.78.92
|
Here in a vid of a Case fellow who is not on the level. I wonder if this was in NY state ? Probably not.
Bored in Mn.
All in fun now.
Don L.
|
|
[Reply] [No Email] | |
| Harry J. Case
08-04-2012 19:01:27
99.195.117.131
|
|
Re: Not on the level Case guy. Video in reply to Don L., 08-04-2012 13:04:15
|
| How did that turn out? I went to sleep and missed the end. Lol.
|
[Reply] [No Email] | |
| Jerry he
08-04-2012 16:31:35
74.34.89.185
|
|
Re: Not on the level Case guy. Video in reply to Don L., 08-04-2012 13:04:15
|
| Don what you would need is a case-o-matic tractor and use the brakes
|
[Reply] [No Email] | |
| McKerrow630
08-04-2012 14:28:04
50.105.87.160
|
|
Re: Not on the level Case guy. Video in reply to Don L., 08-04-2012 13:04:15
|
| That don't look all that easy.....I do like the hand cluch idea!! thou. Heee hee maybe smaller case maybe easier? just my 11 cents worth. God Bless
|
[Reply] [No Email] | |
| John Saeli
08-04-2012 13:38:11
66.66.16.240
|
|
Re: Not on the level Case guy. Video in reply to Don L., 08-04-2012 13:04:15
|
| He Don!! He was jumpy on the clutch & brakes. I would have "slid" it just to center so you never would have noticed it. Even if I were to "slide" it over center, it would have been so gentle, no one would have noticed!!
John from N.Y. State
|
[Reply] [No Email] | |
| Don L.
08-04-2012 14:03:42
99.196.78.92
|
|
Re: Not on the level Case guy. Video in reply to John Saeli, 08-04-2012 13:38:11
|
| I have never done or tried that thing. But I would go get a hand clutch model. It might be so easy then , it could be cheating!
Smooooooooth .....and steady
I would love to try it...
Don L.
|
[Reply] [No Email] | |
| John Saeli
08-04-2012 18:06:57
66.66.16.240
|
|
Re: Not on the level Case guy. Video in reply to Don L., 08-04-2012 14:03:42
|
| That is a hand clutcher. He didn't know how to "slide" into it real easy.
|
[Reply] [No Email] | |
| Don L.
08-05-2012 06:00:24
216.188.220.57
|
|
Re: Not on the level Case guy. Video in reply to John Saeli, 08-04-2012 18:06:57
|
| I think it is foot clutch still.
Don L.
|
[Reply] [No Email] | |
| John Saeli
08-05-2012 17:45:27
66.66.16.240
|
|
Re: Not on the level Case guy. Video in reply to Don L., 08-05-2012 06:00:24
|
| Upno closer examination, you may be correct.
|
[Reply] [No Email] | |
| Hoofer B
08-04-2012 13:57:04
64.7.166.43
|
|
Re: Not on the level Case guy. Video in reply to John Saeli, 08-04-2012 13:38:11
|
| Sounds like one of those rare 2 cylinder Cases.
|
[Reply] [No Email] | |
| Don L.
08-05-2012 12:55:51
99.196.79.37
|
|
Re: Not on the level Case guy. Video in reply to Hoofer B, 08-04-2012 13:57:04
|
| the backgound sound is kinda like that. Maybe a 2 cyl diesel oil field engine. Says it to be at the Wellington Show..... possibly TX??
Don L.
|
[Reply] [No Email] | |
