Author	[Modern View]
Chuck Machinist 08-02-2012 15:38:24 71.176.39.127 Report to Moderator	Any thoughts of a practicle way to remove this combobulation other than cover by cover bolt by bolt? [Reply]   [No Email]
Dalex 08-04-2012 10:28:29 108.38.146.180 Report to Moderator	Re: sixty years of flambeu red in reply to Chuck Machinist, 08-02-2012 15:38:24   Bill's got it ...Cheap Walmart oven cleaner will pull that old paint right off. I did my Farmall "S A" Engine that way , I just hosed it off !!   [Reply]  [No Email]
rbradk 08-03-2012 03:09:23 24.46.39.139 Report to Moderator	Re: sixty years of flambeu red in reply to Chuck Machinist, 08-02-2012 15:38:24   I used readi-strip sprayable paint remover. Thin enough to spray on with a squirt bottle they provide. Let is sit for a bit then pressure wash it off. Stuff is great. Will get you down to cast iron and primer very quickly. Brad   [Reply]  [No Email]
bill talbert 08-02-2012 16:55:37 199.204.125.2 Report to Moderator	Re: sixty years of flambeu red in reply to Chuck Machinist, 08-02-2012 15:38:24   try a good brand of oven cleaner!!! then a HOT water hotsy or what ever brand you might get!!!!   [Reply]  [No Email]
john730d 08-02-2012 16:36:25 208.73.228.5 Report to Moderator	Re: sixty years of flambeu red in reply to Chuck Machinist, 08-02-2012 15:38:24   Looks like paint over grease. Try a hot water pressure washer.   [Reply]  [No Email]
Fixerupper 08-02-2012 19:51:14 100.42.82.164 Report to Moderator	Re: sixty years of flambeu red in reply to john730d, 08-02-2012 16:36:25   With a rotary nozzle. Jim   [Reply]  [No Email]
Dodgeit 08-02-2012 16:29:50 99.95.157.81 Report to Moderator	Re: sixty years of flambeu red in reply to Chuck Machinist, 08-02-2012 15:38:24   An air powered needle scaler for tight spots and a wire brush on an angle grinder for the rest.   [Reply]  [No Email]
Case Nutty 1660 08-02-2012 16:02:03 75.127.24.27 Report to Moderator	Re: sixty years of flambeu red in reply to Chuck Machinist, 08-02-2012 15:38:24   WOW think any would come off with a high pressure steam cleaner? I have a attachment for my pressure washer that can run soda but never tried some thing like that may be to invasive and contamate things cnt   [Reply]  [No Email]
Chuck Machinist 08-03-2012 06:59:43 158.106.52.10 Report to Moderator	Re: sixty years of flambeu red in reply to Case Nutty 1660, 08-02-2012 16:02:03   Thanks a lot for yalls input.I believe i have enough to move foward ! TNX!   [Reply]  [No Email]
Pastor John 08-03-2012 10:47:56 208.126.65.204 Report to Moderator	Re: sixty years of flambeu red in reply to Chuck Machinist, 08-03-2012 06:59:43   Biggest obstacle for little brother is getting started!   [Reply]  [No Email]