CC Cast wheel Questions

Nick@KY

Member
I got these wheels today.
Does anyone have a set like these?
I have a CC with split rims on the back that uses the same centers as these.These bolt together.
The fronts are cast but one piece rim that bolts to a heavy hub.
Looks like they have Case part #'s.I dont have a CC parts book to look them up.
Does anyone have any info on these wheels?
105_3780.jpg

105_3782.jpg

105_3778.jpg

105_3783.jpg

Thanks Nick
 
I have a CC with the same wheels, I believe it is a 36, one of my many future projects.
I think I have seen one other CC with this style wheels, kind of rare, or I think so.
 
Jason;
I was wondering how common they are and if they are in the CC parts book.
Not a lot of Grey Era Case in my area.
Thanks Nick
 
Nick the CC I am working on for a frend has the split rims on the back with the same centers as you have.It is a 38. I have a parts book so I will look and see what it list.Dennis.
 
I have a set of the front wheels with the hub that I outbid a scrapper on at an auction a few years ago. I have no idea what I will use them for, but they are HEAVY. Maybe I will put them on a DC when the stock cast wheels aren't heavy enough!
 

Nick here is a picture of the "wheels for pneumatic farm tires" section from my cc parts book. Looks like both numbers from the flanges on your wheel are listed. Hope this helps!

2012-04-11_20-28-06_175.jpg
 
The fronts are three piece. The cast parts weigh 215 lbs per side plus the tire. I used to pull percentage and we couldn't add wt. I had trouble holding the front end down until I put a set of those wheels on my tractor. After I did that my 38 CC was hard to beat. It regularly pulled 220 to 230%. The rears are harder to find but not real rare.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top