Anyone need 1150 parts

RGMartin

Well-known Member
We have one here that will likely go for scrap in the next year. We haven't used it in 15 years, engine was stuck when I tried to get it going 8 years ago. I freed it, and threw some parts at it trying to get it running, but never did.

The engine might be usable for the block and crank... fuel system is junk. exhaust manifold is junk(source of water entry).

The driveline was ok when last used, sprockets were good, chains were good, pads were junk.

6 way blade, was OK, chrome was OK, but I am sure 15 years has taken a toll on the chrome. Has a ripper.

I just can't keep everything, and it is big obstacle to plow around where it is.
 
Dang Rich I wish you were around the corner from me I would do the six millon dollar man thing and "rebuild" her! I proably have most of what it would take LOL hope some one can at least use some of her the ripper and blade would be worth having good luck cnt!
 
(quoted from post at 11:13:06 02/24/12) do the six millon dollar man thing and "rebuild" her!

If the right 930 or 1030 showed up for a donor it could happen, but it hasn't in the last 8 years I have been watching.

I can't imagine how many hydraulic leaks or issues could have creeped up in the last 15 years that she has sat, and we get 40-50 inches of rain a year, humid, and lots of cloud cover.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top