Albert City Photos (lots of them)

zach in neb · Aug 13, 2011

Went to Albert City today with my cousin and had a great time. Couldn't have asked for nicer weather for a show. I took quite a few pics and thought i would share them. I have 2 videos of the combines i will try and get posted on here sometime soon too.

Joe Young · Aug 13, 2011

Zach

Thanks for posting the pics. It looks like it was a perfect day, with
lost of excellent Case iron to look at.... - Joe

zach in neb · Aug 13, 2011

Here are the short videos i took:

http://www.youtube.com/watch?v=QRuT8v12HGs

http://www.youtube.com/watch?v=NMSnnHj0Slc

Case Nutty 1660 · Aug 13, 2011

thank you for shooting these as those of us who couldn't go still have a view!!!!!! looks like it was A great show for sure, lot of pride put back in into these grand machines,, great pics thanks again cnt

Case Nutty 1660 · Aug 13, 2011

THANKS again great shots it adds some much to se them in action cnt

fixerupper · Aug 14, 2011

Zach, thank you very much for posting the pics. Very good! It was a good day indeed. Didn't hear any numbers for Sat's attendendance, but Friday was a record crowd and judging by how full the parking lot was on Sat it had to be a record too. There's LOTS to see. Jim

Anonymous-0 · Aug 14, 2011

Excellent pictures! Maybe someday, if I can retire, I'll get there in person.

jay-eye-see · Aug 14, 2011

Thank You Zack for taking the time to post the pictures. I had wanted to go Fri/Sat but was unable to make it. Ive looked at them 2 times and am not done yet.

Dutchman · Aug 14, 2011

Thank You for posting ... was planning on going ... put my wife decided to have surgery this past week ...

Looks like CASE had a good turn out and love to see the old iron doing what it was built for ...

THANKS again for sharing ... love them all ..

mark

smallercrawler · Aug 14, 2011

Thanks for the great pictures Zach, really appreciate your effort in posting them. I was wondering the front disc/blade rig is on the tractor just below the crawler photo? Is it a ditcher/hiller? Again thanks for the photos.

Clayton Spencer · Aug 14, 2011

I would like to say thank you for posting these pictures. I am just getting started in collecting Case tractors, and I've looked at your photos three times, thinking of the Case tractors my Dad had, when I was a boy. My Grand Dad's brother was the local Case dealer from '35 until they combined with IH. My Dad had a VAC, for more power he them got a DC, and then a 530. Thank you.

casenut1 · Aug 14, 2011

great pics. i went to the Georgetown,Ohio show, took
some pics.but i don t know how to post or even get
them on the computer. Thanks for the great pics.

Anonymous-0 · Aug 14, 2011

My son and I were there Sat. until mid afternoon. Not a large show but some neat things to see none the less! Just saw the end of baling with the 133 baler, then watched the incline. Maybe northland will post some pics for you members unlike they did after the national 08 show!

J. R. McVay, Sr. · Aug 14, 2011

Very nice photos. I really enjoyed them. I never saw that many Cases in once place in all my life. The Case Industrial that had an implement on the front of it --what was it for?
Jim

Gary from Iowa · Aug 14, 2011

Very nice pictures. There were two 1030s with 504 cubes in them. Installation in both were done very nice.
It was great to see a large crowd and so many activities. Just a great show.

widefront37 · Aug 14, 2011

That 38 CI was used in New York as a sidewalk snow plow. It's hard to see from this angle but the wheel carried the weight of the plow and the bottom edge of the blade [not visable] was adjusted to skim the surface.

DCTOM · Aug 14, 2011

looks like the two tone's are taking over the showes, guess the old tough DC'S are still working and cant make the show DCTOM

Racine · Aug 14, 2011

Hi Zach;
Thankyou very much for all of those lovely pictures that you posted for us all to see, that's GREAT !!, they had a very large range of not only tractors, the cars, and many other "CASE" machines and implements etc and memorabillia. I have been a "CASE" owner and enthusiast here in the South Island of New Zealand, for 70 years now, lots of "CASE" sold here in N.Z. over the years, and still today.

Sincere regards

Alan T. Lewis
Christchurch
NEW ZEALAND

fixerupper · Aug 14, 2011

Zach, thanks again. The word I heard is the attendance is a twitch over 16,000 people for the three days of the show, which blew the old record way apart. By the way, the old attendance record also happened during a Case featured year. The weather was perfect this year and if I remember right it was perfect the last time we featured Case. Come on now, Case guys, let me in on your secret, do you have something lined up with the boy upstairs? LOL Jim

Fred Eagerton Jr. · Aug 15, 2011

You can't get this in Alabama, it would be worth a trip out there to take my Dad and I to see before he's gone. That is the stuff he grew up with.
FE

NickatKY · Aug 16, 2011

Thanks for taking the time to post all of the pictures.Looks like it was a real nice show!
Nick

mikefromiowa · Aug 16, 2011

I was a very good show. I wasn't far from a lot of those photos. I watched most of those tractors plowing. SO, was the air cooled VAI stock or was that someones work? I've not seen one before. It was a 1943 owned by someone from Milford, Iowa

Case Nutty 1660 · Aug 17, 2011

Case never put the A/C motor in tractors they were used for power units, swathers and balers though cnt

mikefromiowa · Aug 17, 2011

(quoted from post at 10:08:08 08/17/11) Case never put the A/C motor in tractors they were used for power units, swathers and balers though cnt

Here is a photo
https://photos.yesterdaystractors.c...5&Parameter=&mode=All&what=pieces

Albert City Photos (lots of them)

Member

Member

Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Member

Well-known Member

Member

Member

Well-known Member

Well-known Member

Member

Member

Member

Well-known Member

Member

Well-known Member

Member

Well-known Member

Member

Well-known Member

Member

Similar threads