Case 1370 seems to be slipping on original take off

workinhard · Apr 13, 2010

we have a case 1370 good hard working tractor it seems to be slipping when you first let off the clutch we dont seem to think it is in the 3-speed because once youre in gear and moving the tractor will not slip.
im working on this tractor currently and am only 22 yrs old i know we should have a professional working on it but as my dad would say its what we got make it work.......right now i have the tractor split in the shop because i thought it could be the torque limiter slipping but that doesnt seem to be the case.....any suggestions ?

jean claude marleau · Apr 13, 2010

I do have a good service manual for 1370 for sale if needed. jc

Moline_guy · Apr 13, 2010

Dads 1370 did that and the spring that pulls the pedal back under the dash was broke. Don't know if that is your problem, but if we would pull up on the pedal it would take off.

olgentdc · Apr 13, 2010

yes, You are working hard , ,and forgive Me for saying Perhaps unnecessarily ,, BUT , We have All Done the SAME THING in that respect and GRINNED EAR TO EAR thru the Processs , The KEY Here Is To Learn something in Process , And NOT GET DISCOURAGED , if Ya make a bad call . I know less than You about this tranny , but I do know theyare repairable in the Masters Hands ,,, hopefully some good minds will chime in and help you along ,, Keep in mind many are gearing up for Field work and may not frequent here before your post is buried , If you don't gwet a qualified answer in a week , POST AGAIN ,, and we will give them a jingle

JoeBob-IN · Apr 13, 2010

Could be pedal adjustment or a sticking clutch cable.

Too Far Gone · Apr 15, 2010

I had that problem on an 830 and it was simply out of any free travel on the clutch pedal,adjusted it and went on just fine

Case 1370 seems to be slipping on original take off

workinhard

New User

jean claude marleau

Member

Moline_guy

Well-known Member

olgentdc

Well-known Member

JoeBob-IN

Member

Too Far Gone

Member

Similar threads