900 propane

SDLoy · May 10, 2009

Hello all. I have a 900 propane that is (was) my main puller until it developed fuel system problems. It still has the origial Ensign system on it, and I would like to keep it that way. The tractor will pop when first trying to start, then die and do nothing. It seemed to do that before and a shot of starting fluid would usually cure the problem. I have been googling ensign carburetors to try to find service information, but without success. Is there an Ensign GURU anywhere that could guide me, or be a source for parts. Some club members say to put an Impco on it and don't look back. I guess that is an option if it can be made to look like it belongs there. thanks Loy

caseman-d · May 10, 2009

Have you checked with your local LP supplier. Thought mine said he could get parts for at least the regulator.
caseman-d

Den N Ms · May 10, 2009

Theres a regulator here.
Regulator

Anonymous-0 · May 10, 2009

Call Everhart LP Supply Co. in Lone Wolf, Okla. at this number 580-846-5633. They sell kits for several different brands of LP regulators.

Anonymous-0 · May 11, 2009

A friend of ours was restoring a 900LP & could not find any LP parts from the CASE dealer. He found everything at a John Deere dealer with no problem. I've heard this from others restoring propane tractors.

900 propane

SDLoy

Member

caseman-d

Well-known Member

Den N Ms

Well-known Member

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

Similar threads