(800) 853-2651
SHOP NOW

Case 850B - PLEASE HELP

D

Dirt of NE

New User
First of all let me apologize, I'm not that familiar with working on machinery, however I have operated them for a little while. I have a Case 850B dozer and someone disconnect and removed my dual batteries for the winter. Problem is, I have NO idea how they are reinstalled. The terminal ends are all still connected to the machine, just the terminals on the battery ends are off. I know one cable is connected to the solenoid, one goes under the block, and there is a jumper that connects the other two terminal posts. I just don't know what configuration to connect them, can anyone help me out? Any help would be appreciated.
 
Tried to edit, but said the time was exceeded. So, I just traced the 2 wires that were connected to the batteries previously. One went directly to the starter, the other was 1 of 2 wires connected to the solenoid. The second wire connected to the solenoid was bolted directly to the back of the block. There was only 1 other short loop wire that connected two of the terminals of opposite batteries together. I just don't know which was which. Which wire should connect to the starter? Which wire should connect to the solenoid? Which two terminals should be connected together? Thank you again for any help.
 
You must log in or register to reply here.

Similar threads

D
Wiring universal ignition switch to farmall 504 diesel
Replies
4
Views
315
used red MN
U
D
Shop bell
Replies
9
Views
928
Dave H (MI)
D
P
90 Series case remote coupler locations??
Replies
2
Views
330
want@1070
W
C
Case 441 PTO
Replies
9
Views
385
clroyer
C
B
Case 1150 Battery Group
Replies
1
Views
232
NIK OWEN
N
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top