Case 310B Parts Needed

guyralph · Aug 27, 2008

Hi, new guy here.
I just purchased a Case 310B tractor.
The clutch lever that runs the throwout bearing is broken and worn.
I might be able to restore it, but would like to find a replacement.
Does anyone have any ideas where to look?
Aparently these are somewhat difficult to locate parts for.

Thanks in advance

Guy

Anonymous-0 · Aug 27, 2008

I recently bought a 311 parts tractor,no sheet metal, but it does have that lever that looks OK. I will have to ask Joe(Wa) how much trouble it is to take off though. Haven't gotten in to one that far in the mechanic's of that area. My email is open if you would like to contact me.

Take care, Roger

guyralph · Aug 27, 2008

I may not have described the part I need correctly.
It is the lever that is inside the bell housing.
It actually pushes on the throwout bearing.
It pivots on a ball that is screwed into the bell housing.
The tractor has to be taken apart to get at it.

VACLee · Aug 27, 2008

Send me an email. Got one laying on the shelf.

TimBinWV · Aug 27, 2008

It's called a clutch fork, I believe.

Joe (Wa) · Aug 27, 2008

Ya have to split same as for a clutch job. Pull rod, bolt & pivot stud on throw out yoke.

Joe

guyralph · Aug 28, 2008

Thanks everyone for your assistance.

Guy

Anonymous-0 · Aug 29, 2008

Hi Ralph; Have you found the fork that pushs the clutch out yet?? Have one here that looks in very good shape, $30. includes shipping.

Roger Hornbaker Ph. 301-233-9005

guyralph · Sep 1, 2008

Yes. VACLee had one.
Thanks though.
I will be adding things to it over the winter so will need more assistance.

Guy

Case 310B Parts Needed

guyralph

New User

Anonymous-0

Well-known Member

guyralph

New User

VACLee

Member

TimBinWV

Member

Joe (Wa)

Well-known Member

guyralph

New User

Anonymous-0

Well-known Member

guyralph

New User

Similar threads