nevertomany
Member
Howdy all,
I have a 1948 Allis-Chalmers B with a CE engine. It has been an ongoing project. Last month i did a 12V conversion on it, but before that it had sat for 3 months while i gathered funds and parts. Now i cannot get the engine to run. I have verified compression, which i will retest tomorow and post results. I have checked for spark, spark is present. Fuel is present at carb, I'm not sure how to check and see if it is getting past the carb. I am not sure on how a magneto works, does anyone know where i can get information on how these work? Although i do know that i have spark at the plug. I am not sure what else the problem could be. Any help would be great!
Thanks, Greg
I have a 1948 Allis-Chalmers B with a CE engine. It has been an ongoing project. Last month i did a 12V conversion on it, but before that it had sat for 3 months while i gathered funds and parts. Now i cannot get the engine to run. I have verified compression, which i will retest tomorow and post results. I have checked for spark, spark is present. Fuel is present at carb, I'm not sure how to check and see if it is getting past the carb. I am not sure on how a magneto works, does anyone know where i can get information on how these work? Although i do know that i have spark at the plug. I am not sure what else the problem could be. Any help would be great!
Thanks, Greg