Leaking PTO on 7060

OhKen · Apr 15, 2017

What all is involved on repairing a leaking PTO seal ? TIA

DrAllis · Apr 16, 2017

Two shaft seals and a very thin O-ring. Pull drawbar out. Drain 17 gallons of rear end oil. Remove the cover plate above the drawbar. Large castellated nut with a lock pin gets removed. A slide hammer connected to the center shaft will pound off the front bearing. A 9/16" wrench will remove the 5 or 6 retaining bolts for the hollow shaft. Use light RTV on the new O-ring when reassembling. Takes about 3 hrs to do. Best bet is to drain oil and remove the cover plate the night before to let it drip dry.

Leaking PTO on 7060

OhKen

New User

DrAllis

Well-known Member

Similar threads