what is correct oil for WF final drive?

I have obtained new seal for final drive on my WF so I would like to know is it straight forward to fit and what is correct oil I should use thanks
 
I take it your replacing the large cork hub seal? The replacement is a rubber one. Pretty straight forward
repair, plan on getting greasy! Be sure to really clean the hub well where the seal rides on the hub, no rust, burrs, flaking paint etc
I put a bit of white lube on my WC when I did it, kinda helped the rubber from trying to bite as it first turned.
 
Sorry to butt in on your post but I have a question. I put new seals in my RC. After about 2 hours of driving the right one started to squeal very loud. Pulled the seal off and checked it over everything looked good so,I lubed it and put it back on. Same thing happens about every two hours and only the right side. Now every time it starts to squeal, I pull the wheel, stick a needle with a grease fitting between the seal and hub, shoot grease in about three places around the hub and put the wheel back on. Getting sick of this. Any ideas? Thanks. Again sorry for nosing in on your post.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top