WD45 Buda diesel engine

What is the head bolt torque sequence for the diesel in a wd45? Should I use copper coat spray on the head gasket, witch side of the gasket go's down on the block, smooth or raised side of a composite gasket?
 
The I&T manual I have states "When installing the cylinder head, tighten the stud nuts progressively, from center outward and to a torque value of 95-100 ft. lbs."
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top