WD-45 valve cleareance

can someone tell me what to set the valves to cold on a WD-45?
I am installing a new/used engine to our tractor and we need to re-install the valve rockers. If anyone has the correct procedure that would be great.
Thanks
Chad
 
.015" COLD intake and exhaust. The setscrew on the crankshaft pulley needs to be straight up or down for TDC on each cylinder.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top