I've gone and done it

ed in cny · Apr 30, 2016

Plowing with the 42 AC B and one thing lead to another and I broke the point. Any Idea where I can get one? Anyone have one or if they have two I'd like to know and get one or both. The one I have has a part number of 309234 but what I read there are about 6-7 different types that fit. I'd like to get this plow and another that is also broke back to working again. New, old, used, it doesn't matter at this point.

Nordic · Apr 30, 2016

Is this something that would be difficult to repair by welding? Is a significant portion missing?

ed in cny · May 2, 2016

Could it be welded? Well yes and no. The part number stated it's a chilled plow point (Part # 309234). I think that's iron if I remember. Have I seen it done yes it's been done before I know but I'm in
hopes that I can get one to replace it. If not that's the route I'll have to go to have it welded and or fabricated over again.

The point is sheared off flush with the bottom cutting angle. Lost about 1 1/2" to 2" of point. Not sure that welding this point may do any good. Iron's tough to weld and hold under these
conditions.

I've gone and done it

ed in cny

Member

Nordic

Member

ed in cny

Member

Similar threads