190 xt

cookster · Apr 29, 2016

Can you change the motor in a 190 xt without taking frame rails loose or do you need to use splitting stands?

screwloose · Apr 29, 2016

You have a 50:50 chance of being right. Go for it.

DrAllis · May 1, 2016

Frame rails must be removed, as they trap the rear plate of the engine. Carefully roll out the front axle with radiator and front support and get it 10 feet away. Whether the front end wants to fall forward or rearward depends on how many front end weights are mounted to it. Remove both side rails and then there's one bolt holding the engine in place.

Elton Fancher · May 2, 2016

I propped up under tranny of 185 and when I rolled engine away it fell over backwards. Lift arms were heavier than the tranny.

fastfarmall · May 3, 2016

Heard of that,, never had it happen, put a floor jack under them.

190 xt

cookster

Member

screwloose

Member

DrAllis

Well-known Member

Elton Fancher

Member

fastfarmall

Well-known Member

Similar threads