Update on the B gas filter jar

Moondoggie · Oct 24, 2015

The gas filter on my 1939 B is a Zenith screw on type, but it was missing the filter. I thought a filter from a chainsaw gas tank could be modified to fit, but that readily became beyond my meager talents.. Instead, I used a round piece of felt seal from a carburetor shaft, put it into the head of the valve assembly and then put a modified faucet aerator (minus the rubber gasket) over it, screwed into the top. Works perfectly, dropping any debris into the jar.
Rebuilt the carburetor and made a new fuel line - starts right up! Time for a nap!

RalphWD45 · Oct 25, 2015

It sounds like (your meager talents), were not so meager after all! That is called innovative!, or McGiver.

D beatty · Oct 25, 2015

Did some searching and found a guy that had that filter last fall. The filter number is 210189.The gentlemen is located in Jordan, Mn. and phone number 612-508-4759. His Email is( [email protected]).

Moondoggie · Oct 25, 2015

Thanks for the lead!

Aaron SEIA · Oct 25, 2015

I've dealt with Matt before. Give yourself some time if you call him. He's a talker. Really great to work with.
AaronSEIA

Update on the B gas filter jar

Moondoggie

Member

RalphWD45

Well-known Member

D beatty

Well-known Member

Moondoggie

Member

Aaron SEIA

Well-known Member

Similar threads