175 Allis hydraulic pump driveshaft

Gary H. · Mar 17, 2015

AGCO no longer supplies the hub for the hydraulic pump drive. Anyone got a source for the hub and shaft?

DrAllis · Mar 18, 2015

Try Force America in Fort Dodge, Iowa

Gary H. · Mar 19, 2015

No luck with them. Looking for used I guess

Eldon (WA) · Mar 23, 2015

(quoted from post at 07:13:09 03/17/15) AGCO no longer supplies the hub for the hydraulic pump drive. Anyone got a source for the hub and shaft?

There are some NOS parts at some dealers yet, but hold onto your hat when you hear the price! I think I was quoted around $850 a few years ago from Walter's Implement here in WA. I found a splined coupler that seemed to fit the shaft at a bearing house and welded it on the nose of the hub which allowed it to use the unworn splines on the shaft. It only lasted about 40 hours before it stripped out, so it must have been too soft. I then just replaced it with one from my parts tractor which had been welded together by the previous owner....no more problems.

TheMrK · Mar 24, 2015

oh great, thats "good" news. they shouldve shot the guy who came up with that design, its complete junk. i have a '78 175 with that on, when i get the money and time, im going to split the tractor and put on the pump thats mounted in the belt pully hole.

175 Allis hydraulic pump driveshaft

Gary H.

Member

DrAllis

Well-known Member

Gary H.

Member

Eldon (WA)

Well-known Member

TheMrK

New User

Similar threads