scraper blade

I have a allis chalmers scraper blade and the blade is wore down is it possible to still get a replacement blade? It has a model number 86 1970 its the only number I can find on it. Thanks for any help
 
It seems to me, a couple years ago a guy posted on the "allis site" about buying a CAT cutting edge that had the same bolt hole pattern as the Oxnard blade.,
 
That was me. I'd have to search the other forum again to see what Cat part number it was. Fit perfect on my old snap coupler blade. Wish I had a torch to take about 1/4" off the top side of the cutting edge though. It doesn't quite sit "flat" with the curve of the blade. The Cat cutting edge has the holes slightly offset from center. That or the AC blade holes are slightly off from center. Either way, it was around $60 for the edge a few years ago.
AaronSEIA
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top