D 17 Diesel camshaft

Finding a used one that is better than the one you have could
be challenging. We went through 3 cams before we sent the
original one to ohio to be welded and reground. With the
shipping I think it cost around $300.
 
(quoted from post at 19:31:28 10/09/14) Finding a used one that is better than the one you have could
be challenging. We went through 3 cams before we sent the
original one to ohio to be welded and reground. With the
shipping I think it cost around $300.

I know, we cant find one either. We were going to have this one reground but the machine shop said it wasn't good enough. Where did you send your cam to have it welded and ground. Address & maybe phone # Thanks , Dave
 
These guys are good..... They resurfaced the lifters for our
diesel http://www.berrycammn.com and can do camshafts. I
will have to look up the slip to find the one we used in Ohio.
 
(quoted from post at 12:34:26 10/10/14) These guys are good..... They resurfaced the lifters for our
diesel http://www.berrycammn.com and can do camshafts. I
will have to look up the slip to find the one we used in Ohio.

Thanks, if u find ok but if not I'll look on their web sight. Thanks again
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top